BR 700 PRO

systems

BR 700 Pro working program

The device works in SRB modern system that has been developed in America. And upgraded and updated idea with soil resistance measurement system which is working on sending waves and electric shocks in the ground, which measure all frequencies and soil resistance and analyze readings which appear finally on the LCD screen.

The main processor of the device is equipped with electronic probe based on the detected frequency measurement, which in turn works on the verification of the discovered water quality and salinity and show the result on the screen.

1. Automatic Search

The device is contain a main unit and the electrodes (4 metal probes) and cables connected to the signal, All detected signals appear on the screen installed on the main unit of the device First, we set probes in the soil surrounding four corners of the place to be anointed and connected in wires to main unit. After that we turn on the device and select type of search, The automatic search will make full scan of the area between four probes and we choose this option at the beginning of search to scan a large area we looking for water in them.

Then the device searches for water between all of these electrodes (probes) and after complete the research it shows the readings automatically on screen

• Example: between the probe 1 to 2 There is water – water type: fresh – the depth is150 meters
• Example: between the probe 2 to 3 There is water- water type: fresh- the depth is 150 meters
• Example: between the probe 3 to 4 there is no water
• Example: between the probe 1 to 4 there is no water

After results of search are appear we go to the place that has been confirmed water in it. And we do a manual search between two probes, only without the need for a full search for the four probes, and we make inventory through approximation of the probes to each other until the inventory of water will inside a smaller space and this small area is the best place to start digging and which has the strongest point of water .

2. Manual Search

Manual search is different from automatic search through the way of search For example: to start with manual search no need to use all probes and all you need is two probes to scan only small area .The manual search provides the ability to search only between two probes (for example)

• Search between probe 1 and probe 2 only
• Search between probe 2 and probe 3 only
• Search between probe 4 and probe 1 only

Dear explorer and water wells finder : This device is the most appropriate and the best choice for you to have accurate and guaranteed results for the detection of underground water and artesian wells